Cleaning

How To Remove Black Mold From Shower Curtains?

Shower curtains are surely considered as the focal point in the bathroom. With the decoration of your home, you must have bought your desired shower curtains that enhance the look of your bathroom.

Shower curtains are basically designed to give a classy look to your bath as well as they also count to protect your bath area too. What if your shower curtains get stained or mold with the excess use and the wet atmosphere inside the bathroom? The most common issue the people have to go through with their shower curtains is they get mold and look untidy.

So, if you are also the one facing this problem & looking for the solution for “How to remove black mold from shower curtains?” then this guide is for you.

Methods To Remove Mold From Shower Curtains

Methods To Remove Mold From Shower Curtains

Well, there is no single method that you can follow to get rid of the molds from your shower curtains. We are here with a list of simple and easy techniques to remove mold from shower curtains. Let’s have a look!

Method #1: Wash Your Shower Curtains In The Washer With Mixture OF Vinegar & Baking Soda

So here is the basic and the easiest method that you can go with. Using a mixture of vinegar and baking soda is quite an effective remedy. Both of these ingredients contain properties to destroy bacteria and also help you in sanitizing your curtains.

Washing Mold on Shower Curtains In The Washer With Mixture OF Vinegar & Baking Soda

Washing your curtains with this mixture frequently can avoid bacteria attaching to your curtains. Let’s check out the supplies you need to have for this method.

Supplies

  • Washing machine
  • Towel
  • Vinegar
  • Baking soda

How To Use?

  1. To remove black mold from shower curtains, start with washing the curtains in the washing machine, setting it up to a gentle cycle, with some extra towel. Towels are needed just to increase the cleaning process. Make sure to use warm water (not too hot or too cold).
  2. Now pour the detergent & half a cup of baking soda in the first cleaning cycle.
  3. After the first cycle ends, add half a cup of vinegar and start the cycle again.
  4. When the machine stops, check your curtains for any mold. If the curtain is clean, take it out.
  5. On the off chance, it still contains a few spots. Then you can make a thick paste of water and baking soda and put it on the mold. Leave it for 10-15minutes and then rinse it off with warm water.
  6. Dry the curtain, you’ll surely have a mold-free shower curtain now.

Method #2: Try Removing Mold By Washing Shower Curtains With Oxygen Bleach

To remove black mold from shower curtains here is another effective method that works for more sturdy stains or molds. Bleaching can damage your curtains & also destroy the design and style of the curtains. But if you have fabric or polyester shower curtains, then you can go for using bleach. Let’s check out this method.

Removing Mold By Washing Shower Curtains With Oxygen Bleach

Supplies

  • Bleach
  • Hot water
  • Tub

How To Use?

  1. Take off your curtains from the rod & place them right straight on the surface. Try removing the mold or stain by scrubbing.
  2. Now fill your tub with warm water(⅓ of the tub), add almost 4-5 tablespoons of bleach. Keep stirring it until it gets properly mixed.
  3. Put your curtain in the tub and leave it for almost an hour. Be very sure to dip the curtain properly in the tub.
  4. After an hour, take out the curtains & then wash them with clean water. Consider washing it a few times to properly remove the bleach from it.
  5. Gently squeeze the curtains & place them to dry.

Method #3: Washing with Hydrogen Peroxide and Borax

This is an extremely effective method to remove black mold from shower curtains as this method not only cleans the curtains but also prevents these molds from setting up again on the curtains. This method is a bit labor-intensive that may be a bit bothersome for a few people.

The important thing to note is that this method can be used with plastic or fabric shower curtains. This is because not every material can endure the harsh chemical present in it.

Washing Mold on Shower Curtains with Hydrogen Peroxide and Borax

Supplies

  • Borax
  • Water
  • Hydrogen peroxide
  • Spray bottle
  • Scrubbing brush

How To Use? 

  1. Remove the curtain from the rod for easy cleaning. As we are going to deal with chemicals, you have to fold the curtain inward towards itself.
  2. Lay it straight on a wooden table and bring it outside like on a lawn or terrace.
  3. Now take a spray bottle, mix almost 2 cups of hydrogen peroxide & 1 cup of water in it.
  4. Be sure to wear gloves while doing it. Spray the solution all over the curtain that it must cover the whole. Leave it for half an hour(30-min).
  5. After 30-mins has passed, now you need a scrubbing brush. The solution is to stick to the curtain, you need to scrub it especially the moldy sides of the curtain.
  6. Don’t do it so hard because it may damage the curtain.
  7. After scrubbing the mold, rinse it off with warm water & make sure that there is no chemical left behind.
  8. If there is still any stain, you can apply a paste of water and borax over the stain. Let it dry and wash it off. This can help you best to remove black mold from shower curtains.

Final Word!

Hope you find the whole article a worthy piece of information to remove black mold from shower curtains. We have listed the most effective methods to help you with this. All you have to do is just follow all the steps carefully and attentively.

The use of toxic chemicals can be dangerous if you don’t take the required precautionary measures. So try cleaning your shower curtains with care and if you are not experienced enough, you take help from professionals to do it for you!

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

How to Clean Window Blinds | Simple Steps Guide 2023